AKOSYS
Home | Refrigeration & Walk In Cooler | Products | AKOCAM | Temperature controllers
ako-15626-29658622ed1a30d87e4da270348dac75

CAMCtrl BASIC

Temperature controller for positive or negative temperature cold storage rooms

Control 5 relays, from -50 ºC to +100 ºC.

Application: Industrial and commercial refrigeration.

Ideal for positive or negative services and ventilated refrigerated units. Defrost using resistances with configurable auxiliary relay. Gas collection manoeuvre (pump-down) selectable per programme. Digital inputs for door switch, high pressure controller, low pressure controller, remote defrost, Set-Point change (energy savings).Allows a 2nd temperature probe to control the evaporator's fans and end of defrost. Does not contain an internal battery.

ako-156131-c5f8e105e9b4ffc9e3202a4e6d4ca01b

CAMCtrl

Temperature controller for positive or negative temperature cold storage rooms with datalogging

3 and 6 control relays, from -40 ºC to +100 ºC.

Application: Industrial and commercial cold.

Ideal for positive or negative services and ventilated refrigerated units. Defrost using resistances with configurable auxiliary relay. Gas collection manoeuvre (pump-down) selectable per programme. Digital inputs for door switch, high pressure controller, low pressure controller, remote defrost, Set-Point change (energy savings). Allows a 2nd temperature probe to control the evaporator's fans and end of defrost. Does not contain an internal battery.

ako-156332-231c3dd2ec9f97e545ae012979d3095e

CAMCombi

Temperature controller for cold rooms with built-in alarm and datalogger

6 relays control, from -50 ºC to +100 ºC, with alarm for cold room store.

Application Cold room stores.

This family of controllers with registers and alarm appears from the CAMCtrl, CAMRegis and CAMAlarm series. Display of information on graphic screen. Autonomous control board, with internal memory up to one year for registering the temperature. Person locked in alarm in room with output for 4 lights and autonomy of 10 hours. Identification of the alarm signal to know which pushbutton has triggered the alarm. Wall and panel mounting. Interior space for up to 2 contactors. Integrated RS485 communication. ModBus protocol.