AKOSYS
Home | Refrigeration & Walk In Cooler | Products | AKOCONTROL | Thermostat / Controller (Panel)

AKO-DH14323

Rango de -50 ºC a + 99,9 ºC, 3 relés, montaje panel

Relé de compresor ,ventilador y auxiliar

Aplicación: cámaras, arcones, muebles y vitrinas que almacenan alimentos refrigerados, congelados para el consumo humano.

Suministrados con declaración de conformidad a orden ITC 3701/2006, RD 899/2006, y Norma UNE EN 13485. Los Reales Decretos 852/2004 y 1109/1991 obligan a la utilización de termómetros en las cámaras de almacenamiento, muebles frigoríficos y vitrinas de productos refrigerados, congelados, ultracongelados, helados y productos termolábiles (medicamentos). Estos equipos permiten controlar la temperatura de la cámara frigorífica y además visualizar la temperatura acorde con la normativa, en un único equipo. Función de relé auxiliar programable como desescarche, alarma o luz. Desescarches programables controlando compresor, resistencias (o inversión de ciclo) y ventiladores. Con una segunda sonda opcional permite desescarches por temperatura.

AKO-D14112, AKO-D14120, AKO-D14123, AKO-D14123-2, AKO-D14123-2-RC

Range from -50ºC to +150 ºC, 1 relay output, panel mounting

Programmable for cold and heat.

Application: Industrial and commercial refrigeration, displays, incubators, vehicles.

Programmable for cold and heat. Display and control in °C and °F with decimalpoint. NTC/PTC probe selectable by programme. Possible password protection for configuration. Defrost by compressor shutdown. Configuration wizard depending on application (8 configurations)

AKO-D14212, AKO-D14223, AKO-D14220

Range from -50 ºC to +99 ºC, 2 relays, panel mounting

Compressor and auxiliary relay (defrost or fans).

Application: Industrial and commercial refrigeration, display cabinets, electrical.

Auxiliary relay function programmable as Defrost, Fans, Alarm or Light. A 2nd optional probe allows ending the defrost process by temperature. Programmable digital inputs such as door, switch, external alarm, remote defrost, energy saving or continuous cycle. Configuration wizard depending on application (8 configurations).

AKO-D14312, AKO-D14320, AKO-D14323, AKO-D14323-C

Range from -50,0 ºC to +99,9 ºC, 3 relays, panel mounting

Compressor, fan and auxiliary relay

Application: Industrial and commercial refrigeration, display cabinets, electrical panels, etc.

Auxiliary relay programmable as Defrost, Alarm or Light. Defrosts programmable by controlling compressor, resistances (or cycle reversal) and fans. A optional probe allows defrosting by temperature. Programmable digital inputs such as door switch, external alarm, remote defrost, energy saving or continuous cycle. Configuration wizard depending on application (8 configurations). The AKO-14323-C model has integrated RS-485 communication.

AKO-D14412, AKO-D14423, AKO-D14412-RC, AKO-D14423-RC

Range from -50 ºC to +99 ºC, 4 relays

Compressor and auxiliary relay (defrost or fans).

Application: Industrial and commercial refrigeration, display cabinets, electrical

Auxiliary relay programmable as an alarm, 2nd defrost, gas collection or light. Defrost by heat, air or cycle reversal, programmable by controlling compressor, resistances (or cycle reversal) and fans. Real-time clock for starting defrosts. A 2nd optional probe allows defrosting by temperature. Programmable digital inputs such as door switch, external alarm, remote defrost, energy saving or continuous cycle. Integrated RS-485 communications. Configuration wizard depending on application (8 configurations). (8 configurations) for AKO-D14412-RC and AKO-D14423-RC devices.

AKO-D16323

Range from -50.0 ºC to +99.9 ºC, 3 relays, panel mounting

Large display. Relay for compressor, fans and defrost.

Application: Industrial and commercial refrigeration.

Defrosts programmable by controlling compressor, resistances (or cycle reversal) and fans. A 2nd optional probe allows defrosting by temperature. Auxiliary relay programmable as Defrost, Alarm or Light. Programmable digital inputs such as door switch, external alarm, remote defrost, energy saving or continuous cycle. Configuration wizard depending on application (8 configurations).

AKO-D14724, AKO-D14725, AKO-D14726, AKO-D14726-C, AKO-D14727, AKO-D14728, AKO-D14729, AKO-D14729-C

2 relays output, panel mounting

Input for Pt100, NTC, PTC probes, J and K thermocouple, 4-20 mA.

Application Ovens, electric panels, industrial installations, incubators, etc.

Programmable for cold and heat. With the 2 relay outputs, the controller can be used to work as 2 independent stages, 2 related stages, neutral zone and one stage plus alarm. Digital input for SetPoint change.

AKO-10123, AKO-10223, AKO-10323

Large frontal 2,3 and 4 relays, panel mounting

Compressor and light relay.

Application: Industrial and commercial cold, cold room stores, etc.

6 keys: Up, Down, Set, Escape, Light and ON/OFF. Pushbutton to turn the unit on and off and light switch. Defrost by compressor shutdown. Continuous cycle is possible. Password enabled for entering programming, programme-selectable indication in ºC o ºF Digital input configurable for door contact, severe alarm, remote defrost, change in set-point temperature.

AKO-D10123, AKO-D10223, AKO-D10323

Extended panel 1,2,3, relays, panel mounting

Compressor relay, auxiliary and fans (3 relays controls only).

Application: Industrial and commercial cold, displays, electric panels, etc.

Auxiliary relay programmable as defrost, alarm or light. Programmable defrost controlling compressor, electric heat (or inverted cycle) and fans. With a 2nd optional probe it enable defrost by temperature. Configurable digital input for door contact, external alarm, remote defrost, energy (saving) or contiunous cycle. Assistant to put on service (8 settings). It incorporates two switches for auxiliary functions ideal for controlling furniture on/off, lights, etc.

AKOTIM-11TE, AKOTIM-11ATE, AKOTIM-11ARTE, AKOTIM-11ARTEB

Range from -50 ºC to +99 ºC, 1 relay, panel mounting

Compressor control relay.

Application: Industrial and commercial cold, displays, electrical panels, etc.

Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other useful parameters to the HACCP. Programme-selectable indication in ºC o ºF 2 inputs for control probe and independent temperature. Digital input for door contact. Defrost by compressor stop.

AKOTIM-12TE, AKOTIM-12ATE, AKOTIM-12ARTE, AKOTIM-12ARTEB

Range from -50º C to +99,9 ºC, 2 relays, panel mounting

Compressor relay and R2 (defrost or fans).

Application: Industrial and commercial cold, displays, electrical panels, etc.

Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other parameters of use to the HACCP, 3 inputs for regulating probe, evaporator and independent temperature. Digital input for door contact. Defrost by electric heat or air. Programme-selectable indication in ºC o ºF.

AKOTIM-13TE, AKOTIM-13ATE, AKOTIM-13ARTE, AKOTIM-13ARTEB

Range from -50 ºC to + 99,9 ºC, 3 relays, panel mounting

Relay for compressor, fans and defrost.

Application: Industrial and commercial cold, displays, electrical panels, etc.

Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures reached, in addition to other useful parameters to the HACCP. Programme-selectable indication in ºC or ºF. 2 inputs for control probe and independent temperature. Digital input for door contact. Defrost by electric heat, air or hot gas bypass

AKO-13112, AKO-13123

Range from -50 ºC to +99 ºC, panel mounting, small format

Small dimensions 66 x 32 x 56 mm.

Application: Industrial and commercial cold, displays, cabinets, etc.

The dimensions of the panel cut-out make them exchangeable with traditional mechanical thermometers, by also integrating the thermostat and defrost clock function in a single unit. Programmable for cold and heat. Defrost by compressor stop. Possible password for entering programming, indication in ºC or ºF programme selectable and probe calibration.