AKOSYS
Home | Refrigeration & Walk In Cooler | Products | AKOCORE | Controllers for Cold Rooms

CAMCtrl BASIC

Temperature controller for positive or negative temperature cold storage rooms

Control 5 relays, from -50 ºC to +100 ºC.

Application: Industrial and commercial refrigeration.

Ideal for positive or negative services and ventilated refrigerated units. Defrost using resistances with configurable auxiliary relay. Gas collection manoeuvre (pump-down) selectable per programme. Digital inputs for door switch, high pressure controller, low pressure controller, remote defrost, Set-Point change (energy savings).Allows a 2nd temperature probe to control the evaporator's fans and end of defrost. Does not contain an internal battery.

CAMCtrl

Temperature controller for positive or negative temperature cold storage rooms with datalogging

3 and 6 control relays, from -40 ºC to +100 ºC.

Application: Industrial and commercial cold.

Ideal for positive or negative services and ventilated refrigerated units. Defrost using resistances with configurable auxiliary relay. Gas collection manoeuvre (pump-down) selectable per programme. Digital inputs for door switch, high pressure controller, low pressure controller, remote defrost, Set-Point change (energy savings). Allows a 2nd temperature probe to control the evaporator's fans and end of defrost. Does not contain an internal battery.

CAMCombi

Temperature controller for cold rooms with built-in alarm and datalogger

6 relays control, from -50 ºC to +100 ºC, with alarm for cold room store.

Application Cold room stores.

This family of controllers with registers and alarm appears from the CAMCtrl, CAMRegis and CAMAlarm series. Display of information on graphic screen. Autonomous control board, with internal memory up to one year for registering the temperature. Person locked in alarm in room with output for 4 lights and autonomy of 10 hours. Identification of the alarm signal to know which pushbutton has triggered the alarm. Wall and panel mounting. Interior space for up to 2 contactors. Integrated RS485 communication. ModBus protocol.

PROPlus

Electronic control panels

For single-phase and three-phase condensing and evaporator units.

Cold rooms above and below freezing. Defrost by air/time or resistors. PROPlus is the comprehensive, single-device electronic solution for managing cold rooms, both above and below freezing, in conjunction with: Standard condensing units, fully enclosed condensation, as a service panel in decentralised systems. Electronic panels with overall 16 A thermo-magnetic protection, for controlling cold rooms, with up to 2 HP compressors, with the following components: Compressor/ Liquid solenoid, single-phase evaporator fans, defrost by air/time or electrical (up to 2,500 W 230 V/l). Electronic panel with thermo-magnetic circuit breaker for control circuits and resistors for controlling cold rooms, with the following components: Compressor/liquid solenoid, single-phase evaporator fans, defrost by air/time or electrical (up to 6.500 W 400 V/lII).