TEMPERATURE AND HUMIDITY CONTROLLER FOR CONSERVATION AND AGEING ROOMS AS WELL AS OTHER APPLICATIONS

AKOCORE

AKO-16624

ATTRIBUTES
  • 4-step start-up wizard
  • Open door alarms
  • Temperature recording, HACCP and humidity (with CAMM module or connected to AKONET.Cloud)
  • Temperature and humidity or only temperature mode of operation
  • Lower power consumption thanks to a remote or programmable change in set point (with CAMM module)
  • Defrost control by air, electric or hot gas
  • Gas collection control
  • 4-20mA/0-10V output for accurate humidity control
  • 7 voltage free relays for a wide range of modes of operation
    – Temperature and humidity: supplies cold and heat (neutral zone) + humidification and dehumidification (neutral zone)
    – Only temperature: supplies cold and heat (neutral zone)
ii
Find all the documentation you need

APPLICATIONS

The temperature and humidity controller is used in:

  • Greenhouses
  • Flower conservation rooms
  • Fresh meat storage
  • Drying and curing processes
  • Wine cellars
  • Climate rooms and/or laboratories, etc.

The modes of operation and its applications are provided below:

Mode of operation Application
Cold + humidification Greenhouses, flower rooms, fresh meat storage, etc.
Cold + heat + dehumidification Drying and curing process
Cold and heat (neutral zone) + humidification and dehumidification (neutral zone) Wine cellars
Cold and heat (neutral zone) Climate rooms, laboratories, etc.
Only cold Only temperature regulation
Cold + dehumidification Drying process (the controller does not dehumidify when it produces cold, only with an external dehumidifier)
Cold + humidification + dehumidification

 

Humidifies and dehumidifies (does not dehumidify when supplying cold)
Cold + heat + humidification

 

Supplies heat for temperature, not humidity

RELATED PRODUCTS:

CAMM Module

Communication gateway for modbus devices

Advanced temperature controller